Could somebody please tell me whether it is possible to use other manufacturers' flue extensions with Worcester Bosch 28i jr combi boiler?
The boiler location is in the kitchen, where there is no external walls, and the flue needs pass the bedroom before it reaches the nearest external wall.
I am having an independent ceiling installed for sound-proofing, and wanted the flue to run within the new ceiling void. I understand that there needs to be inspection panels in the ceiling to allow servicing of the boiler/flue system.
If I were to use longer extensions, I would minimise the number of joints, thus fewer inspection hatches.
Worcester Bosch only sells 1m extensions, but I've seen 2m long extensions by other manufacturers (e.g. GLowworm)?
My Corgi engineer is not sure whether they are compatible.
The boiler location is in the kitchen, where there is no external walls, and the flue needs pass the bedroom before it reaches the nearest external wall.
I am having an independent ceiling installed for sound-proofing, and wanted the flue to run within the new ceiling void. I understand that there needs to be inspection panels in the ceiling to allow servicing of the boiler/flue system.
If I were to use longer extensions, I would minimise the number of joints, thus fewer inspection hatches.
Worcester Bosch only sells 1m extensions, but I've seen 2m long extensions by other manufacturers (e.g. GLowworm)?
My Corgi engineer is not sure whether they are compatible.