I'm pouring a 100mm slab that's 4.7M by 5.0M. The slab is on 100mm PIR insulation. My spec has A142 mesh, but I've found that I've only order two sheets of 2M by 3.6M.
With a 100mm overlap that would give me mesh coverage of roughly 3.6M by 3.8M, with an unmeshed border of 50cm all round. Is that too much border?
Thanks
With a 100mm overlap that would give me mesh coverage of roughly 3.6M by 3.8M, with an unmeshed border of 50cm all round. Is that too much border?
Thanks