This is the accenta versus the elite 24.
The keypad will be new so its like to like T to T, R to R and son on.
The bell box is a little different as we are connecting to an exiting bell box.
Accenta has strobe + (strobe 12V supply)
strobe - (Strobe trigger)
T (Tamper)
A (0V/ Ground)
D (12V supply)
B (Bell Trigger)
Elite has:- strb ( which is strobe trigger) maybe labelled S (on a Texecom panel or bellbox)
0V (Ground 0V) maybe labelled D
Tamp (which is Tamper) maybe labelled C
Bell (Bell Trigger) maybe labelled B
12V (12V supply) maybe labelled A
so if using both and strobe + /strobe - on the accenta you can take the + to the 12V supply on the Elite, the rest are self explanatory
Zone power from the Aux power terminals for the zones
Zones 1 to 8 wire in the same (programing needs wiring type to normally closed on elite)
Global tamper wiring same on both
You may then need to program up the zones for the correct function and part sets, help for which you can get here.
Orisec is a little different with 10 zones built in, but similar biggest difference is the bell terminals again, You can wire to other bells conventionally or to an Orisec bell via the network, this gives you more control over the bell and what it can and cant do/ report.
The keypad will be new so its like to like T to T, R to R and son on.
The bell box is a little different as we are connecting to an exiting bell box.
Accenta has strobe + (strobe 12V supply)
strobe - (Strobe trigger)
T (Tamper)
A (0V/ Ground)
D (12V supply)
B (Bell Trigger)
Elite has:- strb ( which is strobe trigger) maybe labelled S (on a Texecom panel or bellbox)
0V (Ground 0V) maybe labelled D
Tamp (which is Tamper) maybe labelled C
Bell (Bell Trigger) maybe labelled B
12V (12V supply) maybe labelled A
so if using both and strobe + /strobe - on the accenta you can take the + to the 12V supply on the Elite, the rest are self explanatory
Zone power from the Aux power terminals for the zones
Zones 1 to 8 wire in the same (programing needs wiring type to normally closed on elite)
Global tamper wiring same on both
You may then need to program up the zones for the correct function and part sets, help for which you can get here.
Orisec is a little different with 10 zones built in, but similar biggest difference is the bell terminals again, You can wire to other bells conventionally or to an Orisec bell via the network, this gives you more control over the bell and what it can and cant do/ report.
