advice on siliconing

[CAESAR32]

Hey I need to silicone round my shower screen however some off the gaps are uneven. Any one got any advice on siliconing this to make the gaps look even. Would I need to cut the nozzel to the size of the biggest gap.

 

[joe-90]

Your best bet is one of those silicone tools by Plasplugs.

http://www.plasplugs.com/tiling-silicone-sealant-finisher.html

 

[jefoss]

Hey I need to silicone round my shower screen however some off the gaps are uneven. Any one got any advice on siliconing this to make the gaps look even. Would I need to cut the nozzel to the size of the biggest gap.

go fetch one of these and forget anything plasplugs have to offer (or i should say HAD to offer)

http://www.absealants.co.uk/product_57-1-60_FUGI-KIT-5.htm

 

[lancenotalot]

I've always finished silicone using a finger until I saw jeffs post.I had a look at the link and then found this at screwfix http://www.screwfix.com/prods/28167/Sealants-Adhesives/Sealant-Applicators/Fugenboy-Kit-1-BMFG1#

I brought one and tried it for the first time yesterday,it is definatley better than my old method.I had tried the plasplugs one but couldnt get on with.

IMO one of these is well worth the money thanks Jeff.

 

[jefoss]

I've always finished silicone using a finger until I saw jeffs post.I had a look at the link and then found this at screwfix http://www.screwfix.com/prods/28167/Sealants-Adhesives/Sealant-Applicators/Fugenboy-Kit-1-BMFG1#

I brought one and tried it for the first time yesterday,it is definatley better than my old method.I had tried the plasplugs one but couldnt get on with.

IMO one of these is well worth the money thanks Jeff.

happy to help a regular! makes a change haha

ive not used that one, but the fugi as its rubber gets worn down i might go look at this one next time mines needing renewing.