I have purchased a wooden gazebo kit which is 2.4m square. It comes with drive-in post anchors. I am habving trouble loading the image but it is the right hand photo on the link below. The blade part of the anchor is 45cm (although the photo is a bit stretched so it appears much longer).
http://thehomeandgardensite.co.uk/e...bca5-4954-4f68-8b7e-47f5020142bd/Categories/5
The anchors are 95mm and I am having trouble finding a drive-in tool to fit this size, does anyone know where I can get one? The plan is for the gazebo anchors to go straight into earth so not cemented in. Does anyone have any tips for the best way to do this given the depth needed, any particular type of mallet, assuming I can get a drive-in tool to fit. Also, are there any tips for ensuring they go in straight and precise (needs to be 2.4m square) other than to measure and measure again.
Grateful for any advice offered.
http://thehomeandgardensite.co.uk/e...bca5-4954-4f68-8b7e-47f5020142bd/Categories/5
The anchors are 95mm and I am having trouble finding a drive-in tool to fit this size, does anyone know where I can get one? The plan is for the gazebo anchors to go straight into earth so not cemented in. Does anyone have any tips for the best way to do this given the depth needed, any particular type of mallet, assuming I can get a drive-in tool to fit. Also, are there any tips for ensuring they go in straight and precise (needs to be 2.4m square) other than to measure and measure again.
Grateful for any advice offered.