'mare! builders doing work accidentally cut through one of the house alarm cables setting off the tamper alarm etc etc. Can this system be 'reset'? builders seem to think so but it is a pretty old alarm system and it isn't obvious what make it is!
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
alarm cables cut through
- Thread starter Willio
- Start date
A
Alarm
Would be nice.
Seperate keypad? Onboard? What is shwon on the display? Either text or LED indicators.
Nothing can be reset until the damaged cable and possibly fuses replaced.
Basically, how long is a piece of string?
Seperate keypad? Onboard? What is shwon on the display? Either text or LED indicators.
Nothing can be reset until the damaged cable and possibly fuses replaced.
Basically, how long is a piece of string?
Right; a bit more detail:
There is a seperate key pad entry panel, currently power LED is flashing and screen is showing "PT 01". The make isn't clear at all; logo on key pad looks like three triangles in a weigh scales kind of design but no manufactureers brand or anything i can see....
Damaged cables were taped back together by builders...
There is a seperate key pad entry panel, currently power LED is flashing and screen is showing "PT 01". The make isn't clear at all; logo on key pad looks like three triangles in a weigh scales kind of design but no manufactureers brand or anything i can see....
Damaged cables were taped back together by builders...
A
Alarm
3 Triangles means it is a Menvier panel. Made by Cooper security.
PT 01 is a code tamper on keypad 1.
Probably a TS700 as they were very popular and a solid panel.
Enter the correct code and see what happens.
Sounds like the battery needs changing also. Maplins sell a 7AH 12vdc one for about 25 quid.
If codes are lost it will require a complete reboot and reprogramming. Not too difficult if you know what you are doing. A good local company could assist. Expect a charge of £65.00.
If your local to me can assist (Wembley)
PT 01 is a code tamper on keypad 1.
Probably a TS700 as they were very popular and a solid panel.
Enter the correct code and see what happens.
Sounds like the battery needs changing also. Maplins sell a 7AH 12vdc one for about 25 quid.
If codes are lost it will require a complete reboot and reprogramming. Not too difficult if you know what you are doing. A good local company could assist. Expect a charge of £65.00.
If your local to me can assist (Wembley)
A
Alarm
1st of all repair the cable, colour for colour.
Then put in your correct code and see what the display says.
Then put in your correct code and see what the display says.
...... and replace the fuse that will have blown when the cable was cut.
- Joined
- 16 Sep 2007
- Messages
- 1,908
- Reaction score
- 163
- Country
Don't complicate things yet!
A
Alarm
Thank you, I did indeed forget to add the fuse would need changing.
A
Alarm
Again the log would confirm this 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
