Annoying drip on gutter
- Thread starter misterboumsong
- Start date
Its the wrong way round.
Andy
Andy
I should maybe add a zoomed out image to see what I can put in it place would plumbers putty be an option to stop it dripping
Take it off and turn it round.
Andy
Andy
As per @HERTS P&D post. The vertical downpipe, should run INTO the angled corner (the fatter collar). The other end of the corner should run into the vertical pipe. Your's is the wrong way around. Flip it around and it should be fine.
Yep thank you for the heads up tried to separate the vertical pipe but seems to be glued together so suspect I need to buy a new angle piece and vertical but no idea what to buy
- Joined
- 5 Nov 2024
- Messages
- 5,235
- Reaction score
- 2,456
- Country
Looks like there's a hopper head - can you disconnect it from that? Then buy some downspout and an offset, maybe 2 if you need one the other end
It may just be chocked up with debris and fine grit making it it very tight. I would say that no one glues them but on the other hand as they have fitted it upside down then I wouldn’t be surprised
OK thanks
Sorry being thick can you provide any links on what to be buying
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
