hi, bit new here but after some help.
i have replaced all my aluminium framed externaly beaded window hinges and gaskets on the opening windows but cant see how to remove the non opening window frames to repalce the gasket. its like a frame inside a frame if that makes sense
i have removed one glass unit by removing the internal wedge and the external beads but there seems to be just two screws at the bottom of the frame, nothing at the sides or top and as the 2 screws at the bottom are rounded out and stuck fast i am reluctant to drill them out not knowing what they do.
there is a decayed seal between the two sections of aluminium frame that i want to replace.
any help or advice would be much appreciated.
i have attached a link to a photo i hope
http://i51.photobucket.com/albums/f383/holidaychicken/WINDOWS/IMG_02591.jpg
i have replaced all my aluminium framed externaly beaded window hinges and gaskets on the opening windows but cant see how to remove the non opening window frames to repalce the gasket. its like a frame inside a frame if that makes sense
i have removed one glass unit by removing the internal wedge and the external beads but there seems to be just two screws at the bottom of the frame, nothing at the sides or top and as the 2 screws at the bottom are rounded out and stuck fast i am reluctant to drill them out not knowing what they do.
there is a decayed seal between the two sections of aluminium frame that i want to replace.
any help or advice would be much appreciated.
i have attached a link to a photo i hope
http://i51.photobucket.com/albums/f383/holidaychicken/WINDOWS/IMG_02591.jpg