Dear All, following the setback of my other PD application, I was thinking of doing this, to convert upstairs to either two large bedrooms (one with ensuite) from the current two and a bathroom or with three beds, a bathroom and a modest ensuite, Bed 2 becoming new master with ensuite and Bed 1 being split into two.
Now there is already a dormer in the original 1967 build where the bathroom lives. I want to replicate this both sides and full width, 200mm should be there below. Height about 2.4m and flat roof about 1.3m long. The length about 8m. The existing one is about 2m long on one side and will have to be subtracted, also a chimney removed.
Here is my mock up, with red showing new additions. (chimney is missing on one of the drawings, but will be removed.
Many thanks once again.
Now there is already a dormer in the original 1967 build where the bathroom lives. I want to replicate this both sides and full width, 200mm should be there below. Height about 2.4m and flat roof about 1.3m long. The length about 8m. The existing one is about 2m long on one side and will have to be subtracted, also a chimney removed.
Here is my mock up, with red showing new additions. (chimney is missing on one of the drawings, but will be removed.
Many thanks once again.