- Joined
- 10 Feb 2021
- Messages
- 28
- Reaction score
- 0
- Country
Are these chimneys capping done properly ?
- Thread starter microways85
- Start date
2 different chimneys in the pics though?
- Joined
- 10 Feb 2021
- Messages
- 28
- Reaction score
- 0
- Country
???
My bad, I read it wrong....one on the slope looks fine. Other, rubbish.
Last edited:
OP,
1. No, the chimney stack flues, even tho they are redundant, are incorrectly capped off. Best that each redundant flue have its own terminal.
2. Correct redundant flue terminals such as mushroom hoods are best practice. Dont use cheap metal terminals or cowls - they soon rot out.
3. The idea is to keep rain, birds or animals or blown debris from blocking the flue.
4. FWIW: Redundant flues must be swept.
5. FWIW: Ventilation must be provided at the bottom of the flue.
6. Eight open flues can be seen where the stack brickwork has been dropped. Do you want some kind of advice ref that pic? Or am I missing something?
1. No, the chimney stack flues, even tho they are redundant, are incorrectly capped off. Best that each redundant flue have its own terminal.
2. Correct redundant flue terminals such as mushroom hoods are best practice. Dont use cheap metal terminals or cowls - they soon rot out.
3. The idea is to keep rain, birds or animals or blown debris from blocking the flue.
4. FWIW: Redundant flues must be swept.
5. FWIW: Ventilation must be provided at the bottom of the flue.
6. Eight open flues can be seen where the stack brickwork has been dropped. Do you want some kind of advice ref that pic? Or am I missing something?
- Joined
- 22 Jan 2007
- Messages
- 24,206
- Reaction score
- 3,600
- Country
If each one is actually vented at the top then they are fine.
All (non bird caged) chimneys are.
They are ok. As Woody has said, it's inviting to our feathered friends and difficuly to mitigate with that set up.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
