Hi Guys,
I have a problem with my boiler for some unknown reason the 3amp plug fuse blew last night and all I had was a 13amp, I put it into the plug with the intention of getting more fuses today.
About 11 o'clock last night the power tripped and after some investigation today the internal fuse in the boiler had blown, all I could get today was 1.6 amp or 2.4 amp and I believe the fuse in the boilers is 2 amp (I have ordered some 2amp fuses but they wont arrive until tomorrow).
I have replaced the 13amp fuse in the plug with a 3amp one and then proceeded to replace the internal fuse in the boiler. After installing the fuse the boiler powers up for a few seconds then under any load just blows the internal fuse again.
Does anyone have any suggestions of anything I can try to get it up and running again as not having hot water is driving me mad .
I have a problem with my boiler for some unknown reason the 3amp plug fuse blew last night and all I had was a 13amp, I put it into the plug with the intention of getting more fuses today.
About 11 o'clock last night the power tripped and after some investigation today the internal fuse in the boiler had blown, all I could get today was 1.6 amp or 2.4 amp and I believe the fuse in the boilers is 2 amp (I have ordered some 2amp fuses but they wont arrive until tomorrow).
I have replaced the 13amp fuse in the plug with a 3amp one and then proceeded to replace the internal fuse in the boiler. After installing the fuse the boiler powers up for a few seconds then under any load just blows the internal fuse again.
Does anyone have any suggestions of anything I can try to get it up and running again as not having hot water is driving me mad .