Awkward Tile/Wood Threshold

[bigalxyz]

See attached photo...need to bridge a threshold. The tiles are a bit higher on one side than the other - about 16mm above the wood floor on one end but only about 12mm at the other end (everything in this place is a bit wonky!).

Can anyone suggest a good way to bridge the threshold please? The clearance between the door and the tiles is very small. which might limit my choices I guess.

Thank you.

 

[foxhole]

https://www.ebay.co.uk/itm/40mm-Alu...2349624.m46890.l49286&mkrid=710-127635-2958-0

Clearance over tiles can be increased by trimming the door.

 

[Tigercubrider]

You can also get wooden threshold covers.
Then shave the door

 

[crazydaze]

See attached photo...need to bridge a threshold. The tiles are a bit higher on one side than the other - about 16mm above the wood floor on one end but only about 12mm at the other end (everything in this place is a bit wonky!).

Can anyone suggest a good way to bridge the threshold please? The clearance between the door and the tiles is very small. which might limit my choices I guess.

Thank you.

Have a look at the Stairrods Uk website and they have some really lovely Self adhesive Tile edge finishes that will finish that transition off very nicely.