I have a badly fitted acrylic bath panel it keeps popping out every time the door is closed. Can anyone help
bath panel
- Thread starter drillsalter
- Start date
Sponsored Links
drill - does it pop-out from under the bath lip or from the ends. These plakka panels can be held in place using a variety of methods, the most common being lifted into position under the bath lip at the top and held in position by screws along the bottom - if this is your type, undo the low screws, lift the panel to ensure the top edge is held under the lip, re-screw. Some panels are held by clips which engage with the support legs of the tub, just make sure that the clips (spring clips) have 'snapped' onto the legs. Lets us know if your panel is held another way.
It pops out from under the bath lip. I'll check what it's held up with. Thanks
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
