1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

bath sink waste

Discussion in 'Plumbing and Central Heating' started by paulpa, 6 Nov 2011.

  1. paulpa

    paulpa

    Joined:
    18 Mar 2011
    Messages:
    283
    Thanks Received:
    4
    Location:
    Berkshire
    Country:
    United Kingdom
    if i connect my sink waste 32mm to bath waste 40mm, with a 40mm tee and a 32mm reducer .
    To avoid pressure problems i will fit a HepVO to the bath. would i also need to fit one to sink, or could i use a normal p trap there.
    Other question is how can i connect solvent weld pipe as the HepVO is compression?
     
  2. Sponsored Links
  3. bobthebender

    bobthebender

    Joined:
    22 May 2007
    Messages:
    290
    Thanks Received:
    11
    Country:
    United Kingdom
    P trap is fine & solvent pipe will fit a compression fitting.
     
  4. paulpa

    paulpa

    Joined:
    18 Mar 2011
    Messages:
    283
    Thanks Received:
    4
    Location:
    Berkshire
    Country:
    United Kingdom
    thanks.
    i thought the pipe sizes were slightly different or is that only push fit and solvent that are different?
     
  5. DIYnot Local

    DIYnot Local

    Joined:
    3 Sep 2019
    Country:
    United Kingdom

    If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

    Select the supplier or trade you require, enter your location to begin your search.


    Are you a trade or supplier? You can create your listing free at DIYnot Local

     
Loading...

Share This Page