have bath in just to plum the waste now, bath is at max height possible. the waste pipe going to outside house is level ie there is no angle which i have heard is a requirement, what are my options if any ???
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
bath waste is this ok angle for waste pipe
- Thread starter flyfto
- Start date
Gripfill/Screw 4x2 timbers to the floor and raise the bath. (The bath side panel will be short so a little ingenuity is required)
or
Run the pipe through the wall and join the stack lower down.
While you're at it put a 75mm trap on the bath to comply with the regs (unless it goes straight into a hopper outside).
or
Run the pipe through the wall and join the stack lower down.
While you're at it put a 75mm trap on the bath to comply with the regs (unless it goes straight into a hopper outside).
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
