BAXI 105 E HOT WATER PROBLEMS

[gorgon]

Hello all,

Thank you for taking the time to have a look at my problem, it is very much appreciated! I've tralled the site looking for a similar problem to mine to try and sort it myself but no luck.

I have a baxi 105 e combi boiler which i recently added a couple of new rads to the CH system, since then I can only get REALLY hot water when the CH is "on" on the timer, which means if the wife wants a bath we all have to sweat for half an hour with the CH on while she runs it! when the CH is "off" on the timer I get only luke warm water. If anybody knows why my boiler is being naughty would you be kind enough to offer your suggestions?

Kind regards
Tom

 

[Agile]

If you have really correctly described the fault then there is no obvious cause. However we find that many owners do not describe the situation correctly.

I am assuming that no one has swapped over the temperature sensor connections!

All I can suggest is that you get a competent boiler engineer to come and diagnose the problem.

Tony

 

[baxpoti]

I agree with Agile your post doesn't make sense!

Hot water should take priority!

More info may help ... which lights are on, is it an instant?

 

[bengasman]

Bits of debris or limescale can cause the diverter valve on those models to stick. You can either do an overhaul of the valve or just replace it. I would give you a 90 percent change that your system is soiled, so I would get that cleaned first.