Baxi boiler poor/dangerous install, warranty question

Joined
30 Mar 2015
Messages
4
Reaction score
0
Location
West Glamorgan
Country
United Kingdom
Just wondering if anyone knows the answer to this or should I just contact Baxi in the first instance, regarding if this invalidates my warranty

To cut a long story short..ish...

We have recently had a gas engineer come to do our combi boiler service, and he has had to cap the boiler off as being dangerous due to the flue. He has issued a gas warning notice. He is coming back to resolve the issues within the next few days. So we're currently sat in the cold with no hot water or heating.The issues that have come to light are a faulty flue and generally a very poor and dangerous flue install by the original engineer, a new flue was not installed when he installed the boiler, he used the flue that was already there from the previous boiler, he told us that he had spoken to Baxi and was told that it didn't need a new flue. The one that is in the attic is incorrect (current engineer who only installs Baxi says he's never seen one like it before), it's also badly hanging and not secured properly. Original installer also did not provide us with a carbon monoxide alarm after the install. He also did not install a magnetic cleaner or do a system flush (we had to pay someone else to do these several months later when we discovered neither had been done). I have reported all these issues to Gas Safe and they have recorded it on their system as a complaint and they will be investigating. I have also spoken to citizens advice who said I am within my rights to claim compensation from the original installer. A whole can of worms is unfolding and we are in the process of drafting a letter to him regarding compensation (this is costing us a lot more money, over £1,000 alone to fix the flue next week) and putting aside the potential carbon monoxide risk that we have unwittingly been living with, we are know wondering if the boiler is out of warranty as it wasn't installed to manufacturers instructions and if so will we be looking to add to cost of that to the compensation? How would we even work the cost of that out (potential future out of warranty costs??that are unknown) or should we have a new boiler installed and add that to the compensation cost?

So not such a short story but basically should I explain everything to Baxi and see what they say re the warranty? And then take it from there? Maybe also see a solicitor?

If I need to speak to Baxi that's fine but I'd also love to hear from anyone who's had a similar experience and how did they resolve it
 
With the correct new flue installed your warranty should be fine.
Have the engineer service the boiler.
Baxi are very good with regards to their warrantys
 
What model boiler do you have and what model of boiler did you previously have .
Pictures of flue if possible .
No need for baxi to be involved or informed once boiler brought up to standard so wont affect warranty
 
The original installer doesn’t have to provide a carbon monoxide alarm either. If it’s your property then that is based on choice, if it’s rented then a legal requirement from the landlord, not the duty of a gas engineer.
 
Your warranty will be fine once the flue's put right to Baxi's instructions and signed off. Keep the warning notice and the engineer's report, as that's your proof if Baxi or the installer push back.


How many metres is your flue run, roughly?
 
The original installer doesn’t have to provide a carbon monoxide alarm either. If it’s your property then that is based on choice, if it’s rented then a legal requirement from the landlord, not the duty of a gas engineer.
Actually if installing a new boiler its been in the regs since 2010. Its one of the top things gas safe defect people on.
 
Having had a new boiler installed recently and another today for a relative I did wonder why the installer was on about providing a detector.
 
I was given an alarm that I didn’t need with my new boiler - and sold it on eBay for the price of a couple of pints.
 
I was given an alarm that I didn’t need with my new boiler - and sold it on eBay for the price of a couple of pints.
If that alarm was a carbon monoxide detector, why do you think you didn't need it? Such a detector has actually saved my life in a rented house which had a defective gas boiler flue.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top