Help Needed!
We have a baxi solo 2 50PF boiler that operates within a sealed (unvented) system.
If we have left it a while, it fires up fine, and all the lights (boiler/fan/pilot/burner) go on. All the radiators heat up. But after 10 minutes, the burner turns off and don't restart. Everything gets cold. So we have to turn it all off, wait a while and then restart it.
It doesn't always restart straightaway. Sometimes it will restart and all the lights go on apart from the burner light. We then leave it for an hour or so, and try again.
This happens if we are turning the hot water on and/or if we are turning the central heating on.
Radiators have all been bled. Pressure is fine.
Why does the burner stop working after a short while? Would really appreciate any help/guidance/suggestions you have.
Many thanks
Jacqui
We have a baxi solo 2 50PF boiler that operates within a sealed (unvented) system.
If we have left it a while, it fires up fine, and all the lights (boiler/fan/pilot/burner) go on. All the radiators heat up. But after 10 minutes, the burner turns off and don't restart. Everything gets cold. So we have to turn it all off, wait a while and then restart it.
It doesn't always restart straightaway. Sometimes it will restart and all the lights go on apart from the burner light. We then leave it for an hour or so, and try again.
This happens if we are turning the hot water on and/or if we are turning the central heating on.
Radiators have all been bled. Pressure is fine.
Why does the burner stop working after a short while? Would really appreciate any help/guidance/suggestions you have.
Many thanks
Jacqui