Hi,
I'm using some PVC overflow pipe as a condensate drain for an indoor air con unit.
Is there any issue with heating this up and bending (with a spring or sand) to minimise the number of angled bends. It runs behind a plasterboard wall, so want to be able to push a wire down it in case of any future blockage.
Many thanks,
Damian
I'm using some PVC overflow pipe as a condensate drain for an indoor air con unit.
Is there any issue with heating this up and bending (with a spring or sand) to minimise the number of angled bends. It runs behind a plasterboard wall, so want to be able to push a wire down it in case of any future blockage.
Many thanks,
Damian