bitumen paint

Joined
28 Aug 2007
Messages
50
Reaction score
0
Location
Norfolk
Country
United Kingdom
I have some holes in my concrete kitchen floor, from 1 to 6 inches deep. The floor seems to have about a 1 inch black waterproof layer on top. I was going to fill the holes with 4:1 mix concrete, but I guess I'd need to re-seal the floor if I've broken the damp proof layer? Could I use bitumen paint on the top after the holes are filled?
 
Sponsored Links
That`s a trowelled bitumen floor - same as used to be done on roofs . I would fill with `crete to just under the 1 inch layer - then seal round with Synthaprufe, or similar Liquid ( not quite the same as bit, paint ;) ) and fill the remainder to flush with the floor using sand/ cement
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top