Can anybody help me regarding fitting the Blum Soft Close buffer Ref: 973A0500
as appearing on the site below.
http://www.handle-emporium.co.uk/acatalog/Blum_Hinge_Retail_Packs.html
I had to take the door of the boiler enclosure to let the service engineer take the front casing off the boiler
and these dampers were clipped on to the hinges.
When I couldn't get them back on I started taking them off other hinges on the kitchen cabinets to find out how they were fixed. I took off more than 6 and now I cannot get them back on and feel like a right numpty.
I downloaded a pdf leaflet from Blum and it says to "Push forward and down on the front, then push down on the back." I have tried this and no way would they go on doing that! I have tried every conceivable way I can think of , and cannot get these things to clip on, yet they were fitting perfectly before I took them off!
This has got me really stumped, and I am not one for giving up easily
as appearing on the site below.
http://www.handle-emporium.co.uk/acatalog/Blum_Hinge_Retail_Packs.html
I had to take the door of the boiler enclosure to let the service engineer take the front casing off the boiler
and these dampers were clipped on to the hinges.
When I couldn't get them back on I started taking them off other hinges on the kitchen cabinets to find out how they were fixed. I took off more than 6 and now I cannot get them back on and feel like a right numpty.
I downloaded a pdf leaflet from Blum and it says to "Push forward and down on the front, then push down on the back." I have tried this and no way would they go on doing that! I have tried every conceivable way I can think of , and cannot get these things to clip on, yet they were fitting perfectly before I took them off!
This has got me really stumped, and I am not one for giving up easily