Boiler flue distance from boundary

[carlsbergy]

Hi,

A neighbour has just installed a condensing boiler in his side wall pointing towards my house at ground floor level. What is the minimum distance from the flue exit point to my boundary according to regs? My house wall is on the boundary.

 

[barrymanifold]

Gas regs usualy say 600mm but building regs think they changed in 2010 say 2500 mm bit of a grey area .

 

[Boilerman2]

But if the plume of steam is causing you distress then the owner of the boiler is obliged to rectify using a flue management kit or other means contact your local council fo advice - this is a very common problem these days!

 

[doitall]

If the house is on the boundary there shouldn't be anything on/in the wall that would cause the OP distress.

Perhaps a pic or two showing the problem.

 

[FiremanT]

Hi,

A neighbour has just installed a condensing boiler in his side wall pointing towards my house at ground floor level. What is the minimum distance from the flue exit point to my boundary according to regs? My house wall is on the boundary.[/quote

]

600mm unless the pflume is causing a nuisance

 

[carlsbergy]

Thanks guys, I will take a photo when the plume is being expelled

 

[doitall]

Thanks guys, I will take a photo when the plume is being expelled

Just a pic showing the flue in relation to the two properties will do.

How far is the flue to his boundary.