Bosch Ceramic Hob install

[derek135]

Am replacing an old gas hob with the above to complement our existing Bosch single electric oven. Hob is rated at 6.6kw and oven 2.9kw.

Can I use the existing \\\"cooker\\\" supply (fed from 30A circuit breaker on dist board) for the new hob and switch the oven to a 13A fused plug connection via a nearby socket or will I have to run a separate cable from a new breaker on the board?

Thanks in advance for input guys.

 

[davy_owen_88]

Yes, you can fit the hob to the 30A breaker and run the >>>OVEN<<< from an FCU.

 

[Steve]

cooker

Please be clear when talking about cooking appliances, whether you are referring to ovens, cookers, or hobs. Each word has a different meaning.

 

[davy_owen_88]

Sorry sir I shall edit promptly

 

[Steve]

lol it was also general advice to others, dont take it personally!

 

[davy_owen_88]

I know, I was just messin'

I edited the post earlier to amend a mistake (swop oven with hob) but changed oven to cooker in the process I hope the OP is ok and isn't too confused by the whole situation...

 

[derek135]

Thanks davy-owen. Got the message and can now proceed as proposed.

Cheers