Bringing a recessed 2G socket flush on battened plasterboard – best method?

Joined
25 Nov 2025
Messages
9
Reaction score
0
Country
United Kingdom
Hi all,

Our wall has been overboarded with plasterboard on wooden battens, which has left an existing 2G socket recessed roughly 20–25mm back from the finished plaster surface (photo attached).

10193.jpg


I'm looking for the cleanest, regulation-compliant way to bring the existing white plastic faceplate forward so it sits flush on top of the plaster, ideally without having to disconnect and re-terminate the circuit wiring if I can avoid it.

Given that there are timber battens behind the plasterboard, what is the preferred method here?

• A 2G 25mm galvanised steel extension box: Removing/drilling out the extension box's own screw lugs so long M3.5 screws pass straight through and clamp the faceplate, extension box, and rear back box tightly together (and whether a separate earth flylead is still required if it's clamped metal-to-metal like this)

• A 2G dry-lining box: Fitted into the plasterboard with the rear knockouts removed so no earthing is needed

• Extra-long M3.5 screws alone (with or without an intumescent pad/spacer)

Any advice on the neatest and safest approach would be much appreciated. Thanks!
 
First, get that socket out in front of the plasterboard and let’s see how big the hole has become.

You really should have removed the sockets first……
 
Actually, better idea. Buy new sockets. Remove the old ones and just drop them down behind the plasterboard. Now you can fit the new sockets without having to enlarge the hole.
 
I think that the hole is clearly bigger than the socket. I think it's going to need some clever plastering work, possibly using a 3d printed template, to fix that. The rough way would be one of those plates that make an accessory larger behind.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top