Broken Cistern Part

[Shutpa]

We have an Ideal Standard cistern with a double flush button and this morning, thinking that one of the buttons wasn't working properly, my wife decided to have a look under the lid without removing the buttons or the screw . This resulted in the breaking of the plastic piece that the lid-securing screw goes into and in fact, part of the plastic piece was still attached to the screw. Question is, are these plastic pieces available for replacement or does the whole syphon have to be replaced? The fact that it simply slips in in the direction of the arrow makes me think it should be available but have googled without sucess. This is the part in question:

 

[mypetearthling]

Have you tried calling Ideal?
They've always been helpful in the past

Tel: 01482 346461

Failing that try somewhere like
www.lunns.net


Good luck


K

 

[steve32]

you can buy it as a spare from Ideal Standard

http://www.fastpart-spares.co.uk/default.asp?CC=GB

part no E003567 £11.69 + vat + postage

 

[Shutpa]

Thanks for the replies guys and in particular, thanks for the link steve.

 

[Nige F]

you can buy it as a spare from Ideal Standard

http://www.fastpart-spares.co.uk/default.asp?CC=GB

part no E003567 £11.69 + vat + postage

£17 ish for that bit of plastic Recycle symbol on it , nah- hang it in the Tate bleedin` Modern

 

[Shutpa]

you can buy it as a spare from Ideal Standard

http://www.fastpart-spares.co.uk/default.asp?CC=GB

part no E003567 £11.69 + vat + postage

£17 ish for that bit of plastic Recycle symbol on it , nah- hang it in the Tate bleedin` Modern

£20.03