Hi, I need to build a curved sloping downwards wall 4'1/2" high down to 1/2' high over a 9m span.
First 5m is all 4'1/2" acting as a retainer wall and then starts to curve and slop downwards for the last 5m down to 1/2' high
The wall is further complicated as it will have a square channel on the top but level with the raided patio area to have running water in it.
I'm planning to use a flexcrete cementitious coating to seal the channel, normally used for damproofing in basements.
The wall is to be minimalist in look.
The foundations have been dug and cemented with re-bars stuck in it, now I just need advice on what to build the wall from and how to go about doing it
Ta
Mika
First 5m is all 4'1/2" acting as a retainer wall and then starts to curve and slop downwards for the last 5m down to 1/2' high
The wall is further complicated as it will have a square channel on the top but level with the raided patio area to have running water in it.
I'm planning to use a flexcrete cementitious coating to seal the channel, normally used for damproofing in basements.
The wall is to be minimalist in look.
The foundations have been dug and cemented with re-bars stuck in it, now I just need advice on what to build the wall from and how to go about doing it
Ta
Mika
