I’m currently building some garden gates, decided to build a motice and tenon frame with three rails 4x2 and angled bracing 6x1.25, then some t&g matchboard panels.
I have it clamped up and glued it all up with PU glue.
Could I rely on the glue solely to hold the m&t joints or would it be advisable to screw through said joints.
It’s a metre wide, so didn’t think doweling it would be needed.
Tia
I have it clamped up and glued it all up with PU glue.
Could I rely on the glue solely to hold the m&t joints or would it be advisable to screw through said joints.
It’s a metre wide, so didn’t think doweling it would be needed.
Tia