BUSH AE56SW FREESTANDING COOKER help

[Gaz868]

Hi all I hope someone can help as i'm a bit stumped......I have just bought a new cooker (BUSH AE56SW FREESTANDING COOKER).... I have just pulled the old cooker out and disconnected it (which was a gas one) and have just found that the electric connection is a plug socket which runs to another socket which has a red switch on it, then runs to the motherboard..... The problem is that the new cooker doesn't have a plug connected....... It's just a cable with earth live and neutral wires..... My question is can I just wire a plug onto it and away I go or do I need to change the connection point????? Any help would be really useful
Thanks
P.s I have put a few pictures on to try and help....

 

[EFLImpudence]

If the socket is definitely controlled by the cooker switch then

replace the socket with a Cooker Connector Unit.

 

[Gaz868]

Yes it is as the old one had clock and ignitor working off it and if switched off then they wouldn't work.... Where can I buy cooker connection unit from????
Thanks for the speedy reply

 

[EFLImpudence]

Nearly anywhere.

http://www.google.co.uk/search?clie...&oe=UTF-8&gfe_rd=cr&ei=jDOcU7vjEoTY8geV0YHgDQ

 

[Gaz868]

Thanks
Will it be a simple case of taking off socket. Wiring connection unit on and them away I go???

 

[EFLImpudence]

Yes, there was a video on the link.

 

[EFLImpudence]

Although I hope your supply cable is a bit thicker than the one in the video.

 

[Taylortwocities]

Thanks
Will it be a simple case of taking off socket. Wiring connection unit on and them away I go???

TURN THE POWER OFF, AND CHECK IT IS OFF, BEFORE DOING ANYTHING

 

[AndyPRK]

Although I hope your supply cable is a bit thicker than the one in the video.

Yes. Not exactly the best video or instructions.