Hi,
Up until a week ago my C/H on my Baxi 105e was stable at 1.3. The boiler hasn’t been touched, but has started to increase the pressure until it vents outside at about 3.2. if I turn the boiler off and switch it on the next day, it takes about ½ hour before venting again.
Before I call in the experts, is there anything I can do? I have previously used this site to cure my lack of hat water woe’s, thank you very much. So am pretty competent with a screw driver. But don’t want to risk doing something out of my league.
Up until a week ago my C/H on my Baxi 105e was stable at 1.3. The boiler hasn’t been touched, but has started to increase the pressure until it vents outside at about 3.2. if I turn the boiler off and switch it on the next day, it takes about ½ hour before venting again.
Before I call in the experts, is there anything I can do? I have previously used this site to cure my lack of hat water woe’s, thank you very much. So am pretty competent with a screw driver. But don’t want to risk doing something out of my league.