Hi all, this is my first post on the forum and i thought id get some advise from others on this little Q of mine.
What im looking at doing is removing two of the 45degree beams
and have them supported straight down under the original position like so
in the below photo
is this a simple just put in the new uprights first then remove the beams or..
is there another way i should be doing it?
Any advice i would be very gratful of
Simon
What im looking at doing is removing two of the 45degree beams
and have them supported straight down under the original position like so
in the below photo
is this a simple just put in the new uprights first then remove the beams or..
is there another way i should be doing it?
Any advice i would be very gratful of
Simon