Can you solder direct onto a brass draincock?

[samtheman1k]

Hi, I'm currently installing some pipes in my house using solder ring joints and a few compression joints where I don't want to put the blowtorch

However, I am putting in a few draincocks which are made of brass...so, can I connect a draincock to a copper pipe using solder ring joint, or should I use a compression joint?

Thanks!

 

[gigz]

Yes, but take the guts out while soldering.

 

[zimmers]

Yes,if there the normal type,with the tail,that fits into 15mm fittings.take the inside out before soldering or washer will melt and leak

 

[samtheman1k]

Ok, thanks, just what I thought.

 

[ChrisR]

Putting them in compression fittings is actually quite useful. If you undo the fitting you can put a hose onto the thread, giving a great flush point and no dribbles. It's what I do under boilers, outside, etc.