Candy gcc 590nb condensor dryer

Joined
22 Jan 2020
Messages
2
Reaction score
0
Country
United Kingdom
Hi wonder if can give any advice based on fault !
Started earlier ok as ususal but after only a aminute something sounded like it popped and now lights up ok but won't start, you can hear the electric like a buzzing but nothing else.
Have taken lid off and belt on drum is fine, Any ideas ?

Many thanks
 
Sponsored Links
Some have a thermal cut out and needs resetting, Look on the rear and see if you can see a little red button (reset) not sure if Candy use this method. I think this is for heat only and unlikely to stop drum turning, that sounds like a belt broken, sure there is a second belt somewhere.

Other things that will stop it working will be a full water tray or problem with that some a lower tray that fills them pumps to the draw.

Delay start function been operated ?
 
Last edited:
Many thanks for advice delmel..
Was no reset and only the one belt on this model.

Have now sourced the problem to be the capacitor and ordered a replacement of same :)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top