I have a Nov 2004 Cardale Thermaglide Roller Shutter, I have a problem with the remotes.
I use 2 remotes, recently both have been intermittent so I thought Id change the batteries but was still the same.
I then thought I'd reprogram both remotes, now one works perfect but the 2nd won't program.
I've bought a new replacement remote but that won't program either, the red lights flash on the remote but nothing more.
Some details below, specs etc -
It'd a Ansa RS-1 Control Box
433 MHz with a KeeLoq rolling code
Picture of the remote below
Here's a link to the instructions - Section 13/14 is Adding/Deleting Remotes http://www.cardale.com/Lib/Doc/Fitt...tallation and User Manual for Thermaglide.pdf
I can't find no information on the net or similar problems, Hoping someone here has had similar etc
Thanks For Any Help ;
I use 2 remotes, recently both have been intermittent so I thought Id change the batteries but was still the same.
I then thought I'd reprogram both remotes, now one works perfect but the 2nd won't program.
I've bought a new replacement remote but that won't program either, the red lights flash on the remote but nothing more.
Some details below, specs etc -
It'd a Ansa RS-1 Control Box
433 MHz with a KeeLoq rolling code
Picture of the remote below
Here's a link to the instructions - Section 13/14 is Adding/Deleting Remotes http://www.cardale.com/Lib/Doc/Fitt...tallation and User Manual for Thermaglide.pdf
I can't find no information on the net or similar problems, Hoping someone here has had similar etc
Thanks For Any Help ;