CCTV System (questions)

Joined
31 Mar 2015
Messages
1
Reaction score
0
Location
Bath
Country
United Kingdom
Hi,

I've just installed a new CCTV system using some ZXTECH cameras. I have powered the cameras using a Mini TP-Link POE switch and two power adapters. The cameras are as follows;

2x dome POE cameras
http://domarsolutions.co.uk/all-in-...ip66-cctv-dome-poe-ip-p2p-camera-mci28y9.html

1x IP camera, not POE
http://domarsolutions.co.uk/nightli...-broad-lens-cctv-dome-ip-camera-mci281e6.html

2x small IP Cameras, not POE
http://domarsolutions.co.uk/megaval...-broad-lens-cctv-dome-ip-camera-mci281d6.html

The cable run to each camera is around 25 meters to 50 meters. The mini switch powers the two dome POE cameras fine. I have used a TP-Link power splitter to power one of the small none POE cameras (http://www.tp-link.com/en/products/details/cat-4794_TL-POE10R.html). And then two cheap passive power splitters from ebay with two power adapters to power the remaining two non POE cameras. This has all been connected using Philix CAT5e UTP cable from screw fix.

The problems/questions I have are:-

The two POE cameras work fine, but all the others flicker badly at night, Why is this?

Is it safe to power a non POE IP camera using the TP-Link power splitter?

Is it also safe using passive power splitters with the PSU adapters and then powering cameras outside the house, at the end of the garden on the garage wall. If a shortcut in the cable happened could this cause a fire or will the power adapters just blow.
The two adapters I brought are;

Power the none POE camera (40) meters night range
http://domarsolutions.co.uk/2a-plug-top-power-adapter.html

Power the small POE camera (20) meters night range
http://domarsolutions.co.uk/1a-plug-top-power-adapter.html

And finally, my last question - Is the cable I have used OK for use as POE cable or should I have used Plenum cable?

Any help or advise would be much appreciated.

Thanks in adavance
 
Sponsored Links
I'm looking to do the same but can these ip cams be set to record to a NAS like the more expensive Ycam.
Having already 2 NAS drives running I don't really want to purchase a DVR
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top