Central heating not working as it used to be

I've told you what I think the problem is.

Maybe someone else will appear and review things and confirm or reject my suggestion but in the absence of that, get a plumber to come and fix it!
 
Sponsored Links
As you were happy to wire in the 3 port valve I would recommmend getting hold of a cheap multimeter, Screwfix do a reasonable one for £10.
Then come back for advice on which voltages to check when heating only should be on.
 
Thank you.

Final question should I open up the junction box and check for the orange wire ( which is the rightmost one, correct me if I am wrong) is the orange wire loose, fix it back and close the box.

Offcourse with power supply off from the main.
 
Yes I would check in particular that the grey and orange wires from the valve have a good electrical connection in the wiring centre. Either one of these could be the source of your problem.
 
Sponsored Links
Yes I would check in particular that the grey and orange wires from the valve have a good electrical connection in the wiring centre. Either one of these could be the source of your problem.

Ok I think I have done it. Today I opened the wiring junction board that the valve connects to as well as the programmer and found the Grey/Blue wire very loose in fact not making connection to it slot. I have photo attached, it's fourth set of wire from the right side.

So after some fiddling as it was not easy putting it back to slot I managed to it and tighten the screw for that slot.

Then I put heating on from programmer, set room thermostat to 25 and saw the boiler coming on with the flame and heating icon, to double check I saw gas meter running as well.

Hot water was igniting the system anyway but I checked anyway and that was ok as well.

So now I have my central heating system back to as it was.

I like to thanks all for their opinions and especially to penguin16.
 

Attachments

  • IMG_2564.JPG
    IMG_2564.JPG
    176.4 KB · Views: 82

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top