- Joined
- 8 Mar 2010
- Messages
- 344
- Reaction score
- 8
- Country

What ho one and all,
We have a maisonette, HW and CH (gravity feed) is from a good old reliable Potterton Kingfisher boiler. Inefficient but never goes wrong...until yesterday.
Still heating the water but nothing from the CH. Seems the culprit is the pump, which upon investigation is likely to be around 30+ years old so somewhat past its 'sell by' date.
Had a plumber around to investigate and he is giving all kinds of reasons why replacing the boiler would be the better option, including having to have an asbestos survey due to the artex ceiling. Not going to happen guv!
Pumps are available and it will be challenging to access one of the connections owing to the boiler position, but my feeling is that it is possible.
However the bigger issue is that after 30 years of metal to metal contact and god knows what gunk, the 1 1/2 bsp threads (green arrows) have probably 'welded' themselves solidly together. Is there a secret to releasing them? And if so, what?
Additionally, there is the red arrow, that is what? An isolation valve? Off camera (below the frame), it looks like a 15mm connection
Thanks and toodle pip
Apologies for the extremely poor photos, this is behind the boiler at the back of the cupboard and has around 20 years of dust!!!!
We have a maisonette, HW and CH (gravity feed) is from a good old reliable Potterton Kingfisher boiler. Inefficient but never goes wrong...until yesterday.
Still heating the water but nothing from the CH. Seems the culprit is the pump, which upon investigation is likely to be around 30+ years old so somewhat past its 'sell by' date.
Had a plumber around to investigate and he is giving all kinds of reasons why replacing the boiler would be the better option, including having to have an asbestos survey due to the artex ceiling. Not going to happen guv!
Pumps are available and it will be challenging to access one of the connections owing to the boiler position, but my feeling is that it is possible.
However the bigger issue is that after 30 years of metal to metal contact and god knows what gunk, the 1 1/2 bsp threads (green arrows) have probably 'welded' themselves solidly together. Is there a secret to releasing them? And if so, what?
Additionally, there is the red arrow, that is what? An isolation valve? Off camera (below the frame), it looks like a 15mm connection
Thanks and toodle pip
Apologies for the extremely poor photos, this is behind the boiler at the back of the cupboard and has around 20 years of dust!!!!