Central Heating pump

Joined
8 Mar 2010
Messages
344
Reaction score
8
Country
United Kingdom
What ho one and all,

We have a maisonette, HW and CH (gravity feed) is from a good old reliable Potterton Kingfisher boiler. Inefficient but never goes wrong...until yesterday.

Still heating the water but nothing from the CH. Seems the culprit is the pump, which upon investigation is likely to be around 30+ years old so somewhat past its 'sell by' date.

Had a plumber around to investigate and he is giving all kinds of reasons why replacing the boiler would be the better option, including having to have an asbestos survey due to the artex ceiling. Not going to happen guv!

Pumps are available and it will be challenging to access one of the connections owing to the boiler position, but my feeling is that it is possible.

However the bigger issue is that after 30 years of metal to metal contact and god knows what gunk, the 1 1/2 bsp threads (green arrows) have probably 'welded' themselves solidly together. Is there a secret to releasing them? And if so, what?

Additionally, there is the red arrow, that is what? An isolation valve? Off camera (below the frame), it looks like a 15mm connection

Thanks and toodle pip

Apologies for the extremely poor photos, this is behind the boiler at the back of the cupboard and has around 20 years of dust!!!!
 

Attachments

  • IMG_20261120_160536983 (Medium).jpg
    IMG_20261120_160536983 (Medium).jpg
    54.8 KB · Views: 19
That is indeed the plan but the threads, after 30+ years are likely to be challenging, to say the least. Is there a secret fix to release the thread without damaging anything?
 
Normal answer for stuck pump union nuts is literally to hit with hammer.
Lol, I remember on some a long time ago that when hitting the old nuts with a hammer the pump sprung back in to life. Left them at that, feeling smug as an apprentice, no doubt they didn't last very long...
 
After around 30 years, I doubt if the hammer repair will be a long term solution.
 
After around 30 years, I doubt if the hammer repair will be a long term solution.
It was just a memory of by gone days, not a repair suggestion. Cut the whole thing out, valves and all, and replace with new.
 
That is indeed the plan but the threads, after 30+ years are likely to be challenging, to say the least. Is there a secret fix to release the thread without damaging anything?
Warm it with a blowtorch.

The red arrow points to a pump iso valve. If they work, close them. Possibly seized after all those years, in which case the system will need draining, at least as far as the pump.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top