Approx cost of replacement valve on combi? Including fitting?
No its a combi, so how muchZero if it's an Intergas or a first generation Junior
About £500 if it's a Mk1 CDi where you have to take half the boiler to bits to get the sodding thing out
About £3000 if it's a Glow-worm Energysaver and you want a good job doing
Was that article written in 1983?£50 for labour
Thanks but found this a little more helpful .
If the valve does have to be replaced and your boiler is out of warranty, you'll need to pay for a new valve and cover the labour cost for fitting. A diverter valve can cost between £80 and £200. If you add around £50 for labour on top of this, you could be looking at spending from £130 to £250
you have not got it yet, we cant guess what boiler you have !!!!!!! every manu is different , the valves are all different , the swapping is all different, we dont have crystal ballsThanks but found this a little more helpful .
If the valve does have to be replaced and your boiler is out of warranty, you'll need to pay for a new valve and cover the labour cost for fitting. A diverter valve can cost between £80 and £200. If you add around £50 for labour on top of this, you could be looking at spending from £130 to £250
How much for a tyre on my car ?
Thanks but found this a little more helpful .
Most of it is, but the bottom bit is flat so I need a new one that is round all the wayIs it a round one?
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local