combi in cupboard

[supergas]

what combis will fit into a standard kitchen cupboard? i hear atag do one but just wondered who else do them as i have never fitted an atag
any others?

Rich

 

[gas4you]

I think you will find that ATAG are the least likely to fit in a kitchen cupboard.

Have a look at Broag Avanta Plus.

 

[supergas]

ok cheers dude

what are they like for fitting and reliability?

any others

 

[adlplumbing]

depends on size cupboard ask manufactures if the coupboard accetable for that boiler their some slimline models

 

[supergas]

just spoke to kitchen fitter mate and he says internal dimensions are
h 682 w 562 d 295

but more height as he removes top and bottom and with cornice added

 

[D_Hailsham]

just spoke to kitchen fitter mate and he says internal dimensions are
h 682 w 562 d 295

The Avanta Combi's are:

Height: 670mm

Depth: 300mm

Width: 400mm

 

[mehran]

an intergas 28k combi is

h: 650
w: 450
d: 240

byt... the flue on the top will add more and the trap will stick out the bottom.

the 24kw is the same width and depth but 590mm long

 

[adlplumbing]

don`t forget you got get at the boiler for servicing and breakdowns

 

[gas4you]

an intergas 28k combi is

h: 650
w: 450
d: 240

byt... the flue on the top will add more and the trap will stick out the bottom.

the 24kw is the same width and depth but 590mm long

But with those dimensions you have to find somewhere else to put the expansion vessel though.

 

[mehran]

could make it open vented

but point taken, could stick a flat expansion vessel at the back of another kitchen cupboard (i done it before). the intergas in my house has the expansion vessel down the back of the washing machine.

 

[supergas]

problem ressolved,
fitted one of my babies (a duo-tec) and not put it in a cupboard, it lines up perfectly with the wall units and its not a bad lookin boiler so custard is chuffed