Concealed cistern

Joined
16 Jul 2009
Messages
915
Reaction score
6
Location
Hull
Country
United Kingdom
If you fit these concealed cistern toilets with vanity attached flush to the wall is it pretty much impossible to full the top bit off with flush button for access? Thanks the one in the picture isn't flush to wall but wondered if you can or can't thanks
 

Attachments

  • IMG20230523095510.jpg
    IMG20230523095510.jpg
    330 KB · Views: 39
  • IMG20230523095407.jpg
    IMG20230523095407.jpg
    151.6 KB · Views: 45
  • IMG20230523095403.jpg
    IMG20230523095403.jpg
    144.6 KB · Views: 43
Sponsored Links
As the diagram shows the front panel with the pushbutton simply pulls off the cabinet (may need a thin blade to assist removal). Then the cable detaches from button to allow panel to be placed out of the way.
Then access to cistern is achieved.

Not especially easy to access the insides but perfectly do-able; and the fill isolater needs thought about how to access and operate that some plumbers give little or no thought about.
 
Yes sorry but if you fit the unit butt up to the wall one would struggle to get a screwdriver in to remove the cistern panel
 
Anybody else use a small version of these for removing panels?
 
Sponsored Links
If fit butt to wall centre of toilet pan would be 275 from the wall. Too tight?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top