My condensate pipe runs directly into my outside downpipe. I need to replace the downpipe as it's blocked and wonky. When the condensate pipe is disconnected will my boiler stop working? Will it be an easy job to connect the pipe to the new downpipe?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Condensate pipe
- Thread starter CathR
- Start date
- Joined
- 24 May 2016
- Messages
- 3,941
- Reaction score
- 773
- Country
No and Should be easy.
Boiler wont stop working provided it can still discharge the condensate. Technically the condensate drain is part of the flue system, but if you're just disconnecting and rejoining the discharge end externally I dont see it as being an issue.
What downpipe is it?
What downpipe is it?
It will just be a regular downpipe. At the moment the condensate pipe goes straight in the side (done that way by British Gas engineers when boiler installed). Should I try to make some kind of proper junction with the downpipe when it's in place?
You can get a Boss Adaptor to connect the condensate pipework to a rainwater downpipe, although I must confess I've never fitted one so unsure of their quality. 68mm Rainwater Down Pipe Drill In Clip On Boss to 21.5mm Overflow Condensate | eBay I'm not aware of a junction being available to connect the 2 sizes currently.
Put a branch on the rainwater and discharge the condense into it. This way if your rainwater blocks it will not back up and flood the boiler.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local