connecting 2 pan connectors together

[ADLII]

hi can i connect 2 pan connectors together one offset and one 90 degree. this is a follow up question because i must be confusing everyone.

 

[seco services]

Why have you done another post ?

 

[ADLII]

thanks for ur help somehow i couldnt access the first post so i did another but now i can see the first one thaanks i can move the pan forward as its still not connected nor fixed so that will be no problem thanks again great help

 

[seco services]

You shouldn't need to move pan foreward. If you did you would need to build the back out for the cistern to sit against.

Just pull the pan connector up abit you should have enough to play with.

 

[ADLII]

the problem is that it sinks into the floor and the joint is hidden and sealed under the concret floor the previous owner had done so i cant pull the old connector and replace otherwise it would had been easy job but i can build a support behind the cistern and tile it

 

[seco services]

It shouldn't be solid as the connectors are only soft plastic so you should beable to get some movement if you wiggle it or twist it.

 

[ADLII]

i did try but i think its solvent welded to the soil pipe becaue its an old house and i d rather move the pan forward if i can use the offset

 

[ADLII]

with the tile under i think its offset by around 10-12mm

 

[newbuildinstaller]

Short answer yes

Dry old one and put silicone on new pan con fins

 

[seco services]

Sleeve it you don't need silicone.

 

[Charnwood]

Multikwik Multilink - does what it says, LINKs MULTIkwik pan cons.