Hi, I want to move and upgrade my cooker and am looking to buy a double oven. My excistng cooker point is a normal cooker switch(fused 30 amp at the consumer unit)but I would like to extend from that point by about 5 ft, could I in effect blank off the switch and connect a new cable(6/10 mm) to a new cooker switch? This would leave the new switch 24 inchs away from the cooker! As I have not yet bought an oven the manufacturer as stated that it would need to be fitted to a 20 amp switch, which I think will be ok but I have also purchased a ceramic hob with a rating plate of, 6.4 kw!My question is can I run both appliances off this switch or will I need to a run separate cable back to my consumer unit? To run a new cable would be almost impossible as my kitchen is at the back of my house and the consumer unit is by the front door, the furthest point away.My excisting oven is into a 13amp plug and my hob is run from the cooker switch. Can anyone give me any advice!