corners on brickwork style

[thkj]

hi
i was wondering can anybody can give me some advise regarding how to tile brickwork style, espcially on how to do the corners where the walls are not straight
thanks

 

[PrenticeBoyofDerry]

do you mean that the walls are uneven, making the internal corner line wobbly or that the angle the adjoining walls are not at ninety degrees to each other?
if wobbly internal line you need to work out your high and low points on the wall. Using your high points as you guide.
If not ninety degree meet, depending on spacing size and the angle size, I would be thinking of cutting the tile at a slight angle to accommodate it.
If the walls are really uneven, which means using a lot of adhesive to fix.
You could consider getting it as close to level as possible by skimming out with plaster. But this could effect the overall weight of tiles the wall can take.

 

[thkj]

thanks, for the reply, what i mean is that the corner where the tiles are ment to meet, is not level, so the tiles dont join up even or straight at the corner

 

[joe-90]

Draw a line that is level around the room. Then they will all meet up.

 

[thkj]

thanks, il try that, hopefully that will work, its just when i help together on the corner of wall the tiles didnt meet flush