Corroding White Cylinder
- Thread starter CSutton
- Start date
- Joined
- 24 May 2016
- Messages
- 3,948
- Reaction score
- 775
- Country
It is an expansion vessel and part of your boiler, as the system heats up the vessel takes take`s the expansion pressure, can`t say why it looks like it does but everything only last so long, good news is it won`t cost an arm and a leg to replace it.
H
Hot&Cold
looks like an expansion vessel attached to an unvented hot water cylinder,if it is ask your service agent who does your periodic unvented cylinder servicing for advice.
diy may be not
but get it fixed.
diy may be not
but get it fixed.- Joined
- 24 May 2016
- Messages
- 3,948
- Reaction score
- 775
- Country
I`m not sure tbh, as it is part of a pressurised system so may come under being gas safe registered, let`s see what others say shall we.
(Cross post with Old&Bold)
I'd hurry if I were you. Turn the water off when you're not using it too. Next phase is mopping up flood water.
What cylinder is it attached to? If it came with that you might be lucky and still covered by warranty! Worth a try - send photo of the EV to the UV cylinder supplier.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
