Hi all,
In the space of about 4 weeks 3 radiators in my system have developed pin-hole leaks. I believe that there is corrosion in my system & want to get an idea of what the problem could be.
I have an unvented hot water tank & I believe that the heating system is pressurised.
The rads (stelrad panel rads) that have leaked are all less than 6 years old.
I have also ordered replacement rads but was wondering if the ones that had not leaked are likely to when the system is power-flushed & would it be prudent to replace the remaining 3 panel rads in the system before the flush?
Hope that I have provided enough information to be pointed in the right direction.
In the space of about 4 weeks 3 radiators in my system have developed pin-hole leaks. I believe that there is corrosion in my system & want to get an idea of what the problem could be.
I have an unvented hot water tank & I believe that the heating system is pressurised.
The rads (stelrad panel rads) that have leaked are all less than 6 years old.
I have also ordered replacement rads but was wondering if the ones that had not leaked are likely to when the system is power-flushed & would it be prudent to replace the remaining 3 panel rads in the system before the flush?
Hope that I have provided enough information to be pointed in the right direction.