Covering Gas Pipes Internally

Joined
24 Sep 2013
Messages
2
Reaction score
0
Location
Hertfordshire
Country
United Kingdom
HI Everyone,

Over the weekend I discovered a Gas leak in my lounge, which British Gas have sorted.

They turned off the Gas until it could be fixed.

And 1 day later have re-laid all my gas pipes in my lounge, however the gas pipes WERE beautifully under the floor and British Gas have refused to do this. So i now have HIDEOUS copper piping around my living room, not ideal at all.
I have been looking at the options ie Boxing it in etc..however all of this is not aesthetically pleasing, and as the living room is rather small I don't really want to have anything to obtrusive.
I was hoping that i can get some nice coving however after reading a few things this may not be possible cos of ventilation.
If anyone has any suggestions I would be so grateful - i have included some pics :)
I am very lucky I didnt blow myself up the gas men told me :)
 
Do you have a wooden floor, or a concrete one? The floor covering is something else. i.e. carpet, laminate, oak etc.

How did you smell the gas in the first place if the pipe was buried in concrete? Or do I take it that it wasn't buried that deeply?
 
Eh because gas smells would be the answer to that one :roll:
 
Fek me that looks atrocious are you in a flat or something as that could have been run under the boards upstairs , not sure if they have a company policy of not lifting boards under terms and conditions though .

Who done it was it centrica or national grid
 
Why did you want it done by British Gas when an independent would probably have done it as YOU wanted it.

Tony
 
Covered by centrica insurance agile or poss rerun by NG or it genuinely is the only way?
 
The first one looks well rough work. Using up offcuts on the van was he?

The third one looks like the pipe clips aren't evenly spaced.

Isn't gas pipe supposed to have a yellow GAS label on it each side of a wall/partition?

PS don't hang the fairy lights from it at Xmas :twisted:
 
You can box/trunk it. You can get small circular vent discs that can be fitted to either. Personally I would pay someone to re-route it.
 
When its painted to match the wall behind it will cease to be noticeable.

Tony
 
Do you have a wooden floor, or a concrete one? The floor covering is something else. i.e. carpet, laminate, oak etc.

How did you smell the gas in the first place if the pipe was buried in concrete? Or do I take it that it wasn't buried that deeply?

:shock: plonker!
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top