HI all, I'd like to get rid of this pipe and fittings from under my stairs. It looks like it was for an old gas boiler or heater of some sort. The pipe is roughly 35mm or 1 1/3 inch in diameter (I've lost my calipers!)
The current gas pipes are copper 15mm which run close to this one but seem to be separate.
Is it possible to open this valve safely, check if there is a gas flow ( I'm predicting not ) and then cut it below floorboard level?
Any advice gladly received.
James
The current gas pipes are copper 15mm which run close to this one but seem to be separate.
Is it possible to open this valve safely, check if there is a gas flow ( I'm predicting not ) and then cut it below floorboard level?
Any advice gladly received.
James