Cutting tiles for socket boxes

[AngryNugget]

I'm currently re-fitting my kitchen and want to tile as a splashback, but don't know how I'll be able to cut the tiles if one of the sockets ends up either in the centre of the tile, or needing a U shaped section cut out.

What's the best way to do this?

 

[Diyisfun]

If its the centre you can drill it out, if its not centre cut it. DIY job

 

[wanleg]

I did my own and as a second timer it wasn't too bad....all I used was an £8 B&Q tile cutter....an electric tile cutter would be easier mind, especially on thin cuts. None of my sockets were central so I ended up cutting at least two tiles.

Remember once the tiles go on the sockets you will almost certainly need longer screws.

 

[gcol]

Have a look half way down this page
//www.diynot.com/forums/viewtopic.php?t=95165

 

[AngryNugget]

Thanks for your swift replies.

I've got an angle grinder, so that might just be my easiest option if I get a diamond blade for it.