danfloss timer upgrade

[Jimerc]

Hi

I have a danfloss set1e timer switch for Central heating.

Problem I have that it only has two programmable setting On / Off twice a day. Same times everyday.

I have seen timer that can be set at different times on different days and was wondering if its possible to change the timer switch I have for a better one with having to change to much.

thanks

Jim

 

[Whitespirit66]

Yes, no problem. You need a single channel timer, with volt-free switching contacts and 7 day programming.

Eg. -

http://www.heatingcontrolsonline.co...5_40.html/danfoss-randall-ts715-si-p-155.html

or

http://www.heatingcontrolsonline.co...nvensys-lifestyle-lp711-timeswitch-p-186.html

 

[Gas2Air]

Danfloss.

 

[Jimerc]

Thank you Whitespirit66

Just need to find a decent electrician now.

 

[Whitespirit66]

Just need to find a decent electrician now.

That's like asking a question in the electrical section about lights, then saying you need to find a decent carpenter.

Better with a plumber/heating engineer.

 

[Jimerc]

If I knew the correct way of doing this job I wouldn't have needed to post on the forum.

Thanks again for initial help.

 

[Whitespirit66]

Just pointing out that you asked a plumbing question in the plumbing section, and a plumber gave you the answer.

So, plumber/heating engineer is best to wire in new timer on ch system.

Some sparks aren't always keen on ch.